| Languages supported in UI | English (SW v1.0) | 
        
            | Weight | 1 lbs 6 oz (624g) | 
        
            | Battery | Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 0 °C to +40 °C | 
        
            | Power Adapter | Input: 100 to 240 VAC ą10%, 50/60Hz Output: 15 VDC, 2 A maximum Class II | 
        
            | Host Interface | USB type C | 
        
            | Display | 800 x 480 color capacitive multi-touch | 
        
            | Dimensions | 8.5 in x 4.5 in | 
        
            | Operating Temperature | 0°C to 45°C | 
        
            | Storage Temperature | -10°C to +60°C | 
        
            | Operating Relative Humidity | 0 % to 90 %, 0°C to 35°C 0 % to 70 %, 35°C to 45°C | 
        
            | Operating Altitude | 4,000 m 3,200 m with ac adapter | 
        
            | Vibration | Random, 2 g, 5 Hz-500 Hz | 
        
            | Drop | 1 m drop, 6 sides | 
        
            | Active Network Diagnostics | 
        
            | Diagnostic Protocols | Link Layer Discovery Protocol (LLDP) Cisco Discovery Protocol (CDP) Fast Link Pulses (FLP) | 
        
            | Nearest Device Diagnostics (If available throughdiagnostic protocols) | Switch Name Port Number VLAN Name Advertised Data Rates Advertised Duplex | 
        
            | Power Over Ethernet Compatibility | IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation withLLDP/CDP | 
        
            | Power Over Ethernet Diagnostics | Advertised Power Class (1 to 4) (SW v1.0) Advertised Available Power Powered Pairs Diagnostics forboth Single and Dual signatures | 
        
            | Power Over Ethernet Measurements | Loaded Voltage (V) Loaded Power (W) | 
        
            | Port Blink | Blink the light of the connected port | 
        
            | Cable Test Specifications | 
        
            | Test Port | Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs | 
        
            | Commissioning Autotests | 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only Test Speed: 6 seconds for lengths< 70 m | 
        
            | Cable Types | Balanced twisted-pair cabling Unshielded twisted-pair Screened twisted-pair 2-pair and/or 4-pair | 
        
            | Wire Map-Only Tests | Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings(Straight through, Half-crossover, Full-crossover) Test speed: 1 second for lengths < 120 m | 
        
            | Length (Maximum) | 305 m (1000 ft) | 
        
            | Nominal Velocity of Propagation (NVP) | User settable | 
        
            | Tone Generator | Generates digital tones compatible with Fluke Networks IntelliTone probe. Generates analogy tones compatible with general analogprobes | 
        
            | Remote ID Locators | Use remote ID terminations to identify up to 7 unique ports or office outlets |