|
|
|
|
Fluke Networks LIQ-100
Catalog #: LIQ-100
LinkIQ™ Cable + Network Tester
- Overview
- Specifications
- Summary
Product Highlights
- Cable Performance testing up to 10GBASE-T via frequency-based measurements
- Network features: Nearest Switch Diagnostics, including advertised data rate, switch name and port number, and VLAN
- PoE verification: Detects the PoE class (1-8) and power, and performs a load test of available PoE from the connected switch
- Displays cable length, wire map, and distance to open or short
- Manage results and print reports from LinkWare™ PC
Each Unit Includes
- 1 - LinkIQ™ Cable + Network Tester
- 1 - Remote ID (#1)
- 1 - RJ45-RJ45 Patch Cord
- 1 - AC Charger
- 1 - RJ45/11 Universal Coupler
- 1 - Carrying Case
| General Specifications |
| Languages supported in UI |
English (SW v1.0) |
| Weight |
1 lbs 6 oz (624g) |
| Battery |
Type: Lithium-ion, 3.6 V, 6400 mAh Life: 8 hours typical Charge time: 4.5 hours Charging temperature range: 0 °C to +40 °C |
| Power Adapter |
Input: 100 to 240 VAC ą10%, 50/60Hz Output: 15 VDC, 2 A maximum Class II |
| Host Interface |
USB type C |
| Display |
800 x 480 color capacitive multi-touch |
| Dimensions |
8.5 in x 4.5 in |
| Operating Temperature |
0°C to 45°C |
| Storage Temperature |
-10°C to +60°C |
| Operating Relative Humidity |
0 % to 90 %, 0°C to 35°C 0 % to 70 %, 35°C to 45°C |
| Operating Altitude |
4,000 m 3,200 m with ac adapter |
| Vibration |
Random, 2 g, 5 Hz-500 Hz |
| Drop |
1 m drop, 6 sides |
| Active Network Diagnostics |
| Diagnostic Protocols |
Link Layer Discovery Protocol (LLDP) Cisco Discovery Protocol (CDP) Fast Link Pulses (FLP) |
| Nearest Device Diagnostics (If available throughdiagnostic protocols) |
Switch Name Port Number VLAN Name Advertised Data Rates Advertised Duplex |
| Power Over Ethernet Compatibility |
IEEE 802.3af/at (SW v1.0) Hardware negotiation with signature resistance Software negotiation withLLDP/CDP |
| Power Over Ethernet Diagnostics |
Advertised Power Class (1 to 4) (SW v1.0) Advertised Available Power Powered Pairs Diagnostics forboth Single and Dual signatures |
| Power Over Ethernet Measurements |
Loaded Voltage (V) Loaded Power (W) |
| Port Blink |
Blink the light of the connected port |
| Cable Test Specifications |
| Test Port |
Shielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs |
| Commissioning Autotests |
10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only Test Speed: 6 seconds for lengths< 70 m |
| Cable Types |
Balanced twisted-pair cabling Unshielded twisted-pair Screened twisted-pair 2-pair and/or 4-pair |
| Wire Map-Only Tests |
Document wire map Length of each pair Diagnose split pairs User selectable T568A or T568B User selectable crossover settings(Straight through, Half-crossover, Full-crossover) Test speed: 1 second for lengths < 120 m |
| Length (Maximum) |
305 m (1000 ft) |
| Nominal Velocity of Propagation (NVP) |
User settable |
| Tone Generator |
Generates digital tones compatible with Fluke Networks IntelliTone probe. Generates analogy tones compatible with general analogprobes |
| Remote ID Locators |
Use remote ID terminations to identify up to 7 unique ports or office outlets |
| Datacom Testing and Telecommunications/Datacom Cable Testers Template |
| Tests Power over Ethernet |
Yes |
| Warranty |
3 YEARS |
| Product Weight |
1.39 LBS |
| Product Height |
4.79 IN |
| Product Length |
21.27 IN |
| Product Width |
11.43 IN |
| Shipping Weight |
3.57 LBS |
| HTS/Schedule B Number |
41113600.90200 INSTRUMENT |
| ECCN Number |
5B991 |
| Country of Origin |
United States |
| Shipping Height |
6.00 IN |
| Shipping Length |
13.00 IN |
| Shipping Width |
11.00 IN |
|
|
|
|