|
|
|
|
Amprobe HD160C
Catalog #: 2670787
True RMS Heavy Duty Multimeter with Temperature, 1500VDC/1000VAC, CAT IV, IP67 Rated
- Overview
- Specifications
- Summary
- Accessories
Product Highlights
- Highest voltage capability, measuring to 1500V DC and 1000V AC
- CAT IV 1000V rated
- Special sealing for environment and water resistance. IP67 rated
- Constructed with drop-resistant housing and PCB mounting
- Measures capacitance, temperature and frequency
- Superior 10,000 count resolution with bar graph
- Magne-Grip holster, frees both hands for work
- Includes high voltage test leads with threaded alligator clips
- Temperature measurement built-in
- Frequency and capacitance
- Digi-Glo bright backlight
- Display 4 digit LCD, 9999 counts, with annunciators, menu features and 41 segment bargraph
- Polarity indication automatic
- Input overload indication OL, -OL
- Auto power-down
Each Unit Includes
- 1 - Set of Heavy Duty CAT IV 1000 V Test leads with threaded alligator clips (TL1500)
- 1 - Battery (installed)
- 1 - Hex wrench (inside holster)
- 1 - Holster with Magne-Grip strap
- 11 - Type K Thermocouple Probe (TP255)
- 1 - Temperature Adaptor (TA-1A)
- 1 - User Manual
| Display |
4 digit LCD, 9999 counts, with annunciators, menu features and 41 segment bargraph. |
| Polarity Indication |
Automatic |
| Input overload |
indication OL, -OL. |
| Low Battery Indication |
B; less than 50 hours battery life remain, accuracy is no longer guaranteed |
| Display Update Rate |
2/sec, nominal; 20/sec for bargraph. |
| Oper. Temp. |
0 °C to +50 °C @ 0 to 75 % R.H. |
| Storage Temp. |
-20 °C to 60 °C @ 0 to 80 % RH, battery removed |
| Altitude |
2000 meters - indoor use |
| Temperature coefficient |
0.1 x (spec. accuracy)/°C (0 °C to 18 °C and 28 °C to 50 °C) |
| Fuse |
F 2 A/1500 V fuse (8 mm x 65 mm), I.R. 30 kA – Amprobe p/n FP700 |
| Power |
Standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22 |
| Auto Power-Down |
Meter powers down after approximately 30 minutes of inactivity. Not in Min/Max function. |
| Battery Life (typical) |
150 hours, alkaline. Backlight usage consumes extra power and will decrease battery life significantly. Backlight auto-off after approx. 60 seconds. |
Dimensions, without holster
(H x W x D) |
200 x 102 x 59 mm (7.9 in x 4.0 in x 2.3 in) |
| Weight (incl. battery) |
642 g (22 oz) |
| Accessories |
Heavy Duty CAT IV 1000 V Test leads with threaded alligator clips (TL1500), battery (installed), hex wrench (inside holster), Holster with Magne-Grip strap, Type K thermocouple probe (TP255), Temperature Adaptor (TA--1A) and User Manual. |
| Case material |
Reinforced, high-impact, fire retardant thermoplastic |
| Safety |
Meets EN 61010-1 CATIV1000V(1500VDCmax)ClassII,EN60529:IP67CAT IV 1000 V (1500 V DC max) Class II, EN 60529:IP67 |
| EMC |
Meets EN 61326-1 |
| Electrical Specifications |
| DC Volts Ranges |
1000 mV, 10 V, 100 V, 1500 V |
| DC Volts Resolution |
0.1 mV in 1000 mV range |
| DC Volts Accuracy |
±(0.1 % rdg + 5 dgt) |
| DC Volts Input Impedance |
10 MΩ |
| DC Volts CMRR |
>120 dB up to 1500 V dc |
| DC Volts NMRR |
>60 dB at 50 or 60 Hz |
| DC Volts OL Protection |
1500 V dc or 1000 V ac rms |
| DC Volts Transient protection |
12 kV impulse (1.2 ìS/50 ìS) based on EN 61010-1:2001 impulse requirement for at CAT IV 1000 V/1500V dc product. This product should not be used in installations |
| AC Volts True rms Ranges |
1000 mV, 10 V, 100 V, 1000 V |
| AC Volts True rms Resolution |
0.1 mV in 1000 mV range |
| AC Volts True rms Accuracy |
1000 mV (45 Hz to 400 Hz) ± (1.2 % rdg + 10 dgt) |
| AC Volts True rms Accuracy |
10 V, 100 V (45 Hz to 500 Hz) ± (1.2 % rdg + 10 dgt) |
| AC Volts True rms Accuracy |
10 V, 100 V (500 Hz to 2 kHz) ± (2.0 % rdg + 10 dgt) |
| AC Volts True rms Accuracy |
1000 V (45 Hz to 1 kHz) ± (2.0 % rdg + 10 dgt) |
| AC Volts True rms Input Impedance |
10 MΩ |
| AC Volts True rms Conversion type |
True rms, ac coupled 5 % to 100 % of range |
| AC Volts True rms Crest factor |
≤ 3 |
| AC Volts True rms OL Protection |
1500 V dc or 1000 V ac rms |
| Transient protection |
12 kV impulse (1.2 µS/50 µS) based on EN 61010-1:2001 impulse requirement for at CAT IV 1000 V product. This product should not be used in installations where transients exceed 12 kV |
| DC Current Ranges |
100 µA, 1000 µA, 10mA, 100mA, 400mA, 2A (Auto/Manual ranging) |
| DC Current Resolution |
0.01µA in 100 ±A range |
| DC Current Accuracy |
100 µA range ± (0.5% rdg + 10 dgts) |
| DC Current Accuracy |
1000 µA to 400 mA ranges ± (0.5% rdg + 5 dgts) |
| DC Current Accuracy |
2 A range ± (1.5% rdg + 10 dgts) |
| DC Current Input protection |
2 A/1500 V fast blow ceramic fuse 8X65 mm on A input , FP700 |
| Multimeters Template |
| Type |
Digital |
| Style |
Hand-Held |
| Measures AC V |
Yes |
| Measures DC V |
Yes |
| Measures AC A |
Yes |
| Measures DC A |
Yes |
| True RMS |
Yes |
| Maximum Voltage AC |
1000 V |
| Minimum Voltage AC |
0.1 mV |
| Resolution AC Volts |
0.1 mV |
| Maximum Voltage DC |
1500 V |
| Minimum Voltage DC |
0.1 mV |
| Resolution DC Volts |
0.1 mV |
| Maximum Current AC |
2 A |
| Minimum Current AC |
0.01 uA (0.00001 mA) |
| Resolution AC Current |
0.01 uA (0.00001 mA) |
| Maximum Current DC |
2 A |
| Minimum Current DC |
0.01 uA (0.00001 mA) |
| Resolution DC Current |
0.01 uA (0.00001 mA) |
| Basic Accuracy V DC |
± 0.1% Rdg + 5D |
| # Digit Display |
4 |
| Counts |
9999 . |
| Backlight |
Yes |
| Manual/Autoranging |
Both |
| Dual Display |
No |
| Analog Bargraph on Display |
Yes |
| Decibels |
No |
| Resistance |
Yes |
| Frequency |
Yes |
| Continuity |
Yes |
| Capacitance |
Yes |
| Temperature |
Yes |
| Diode Testing |
No |
| CAT Rating |
IV |
| CAT Voltage |
1,000 V |
| IS |
No |
| Peak Hold |
No |
| Overload Protector |
Yes |
| Kelvin 4-wire Measurement Capability |
No |
| Wireless Display |
No |
| Data Hold |
Yes |
| Low-Pass Filter |
No |
| Duty Cycle % |
30% to 70% |
| Unique Features |
Special Sealing for Environment and Water Resistance, Polarity Indication Automatic |
| Warranty |
1 YEARS |
| Warranty Details |
1 Year from the Date of Purchase, This Warranty Does Not Cover Fuses, Disposable Batteries or Damage from Accident, Neglect, Misuse, Alteration, Contamination or Abnormal Conditions of Operation or Handling |
| Additional Info/Comments |
Test Leads with Alligator Clips, 3x Current Clamps, Padded Vinyl Case, 2x Deluxe Hard-Shell Carry Cases, High Voltage Probe, 2x Replacement Fuses, K-type Thermocouple, Temperature Adapter |
| Safety Approval |
CSA |
| IP Rating |
IP67 |
| Product Weight |
642 GRAMS (1.42 LBS) |
| Product Height |
7.9 IN |
| Product Length |
2.3 IN |
| Product Width |
4 IN |
| Data Logging |
No |
| Calibration Included |
Factory Calibration |
| Power Supply Voltage |
Battery Powered |
| Country of Origin |
Taiwan |
| Shipping Height |
3.00 IN |
| Shipping Length |
10.00 IN |
| Shipping Width |
8.00 IN |
|
|
|
|