|
|
|
|
Fluke Networks MT-8200-61-TNR
Catalog #: 4586079
IntelliTone Pro 200 Lan Toner, SmartTone Analog Toning, 5V p-p
- Overview
- Specifications
- Summary
- Accessories
Product Highlights
- Provides robust toning into active network equipment while eliminating cable misidentification due to bleed
- Banana jacks allow you to use only the leads you need and facilitates easy replacement
- Supports all VDV cable types (RJ45, RJ11, coax, and bare wire)
- Test cable continuity, eliminating need for separate diagnostic tool
- Precisely isolate wire pairs with built-in SmartTone analog toning
- Tone active networks safely and effectively with IntelliTone digital mode
- Identify resistance and if digital tone or analog tone function is operational
- Identify and diagnose Ethernet link connectivity with NIC/hub indication
- Cable termination indicator identifies if cable is connected or not
- Knob provides simple, task oriented operation
Each Unit Includes
- 1 - LAN Toner
- 1 - Coax F Connector Cable
- 2 - RJ11 patch cable
- 2 - RJ45 patch cable
- 1 - Test lead with alligator clips
- 2 - Lanyards
- 1 - Quick Start Guide
- 1 - 9V Battery
| Operating temperature |
32 °F to 104 °F (0 °C to 40 °C) |
| Storage temperature |
-4 °F to +140 °F (-20 °C to +60 °C) |
Operating relative humidity
(% RH without condensation) |
95% (50 °F to 95 °F; 10 °C to 35 °C)
75% (95 °F to 104 °F; 35 °C to 40 °C)
Uncontrolled < 50 °F (< 10 °C) |
| Vibration |
Random, 2 g, 5 Hz – 500 Hz |
| Shock |
1 m drop test with and without module |
| Safety |
IEC 61010 Category: None |
| Altitude |
3000 m |
| EMC |
EN 61326-1 |
| Battery type and life |
9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
| Applications |
Copper cabling media, including shielded (STP) and UTP cable; 75 or 50 Ohm coaxial cable; two conductor
control, security, generic cabling. 10 Base-T or 10/100/1000 Base-T datacom networks. |
| Toner |
| Dimensions |
5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) |
|
| Display |
LED |
| Control |
Thumbwheel switch |
| Toner interface |
Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F connector for coaxial cabling, Banana jack plugs (2) - two conductor wiring |
| Toner frequency |
IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500-1200Hz, 4 Songs |
| Output power |
5 V p-p |
| Auto power down |
Turns off automatically after 2.5 hours of inactivity |
| Probe |
| Dimensions |
8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm) |
|
| Display |
(8) LED indicators, Synch LED indicator |
| Audio |
IntelliTone: Microprocessor controlled audio files, Analog: Detected toner signal |
| Control |
Thumbwheel switch, volume control wheel |
| Tone detection |
Detects IntelliTone™ digital signal for Locate, Isolate and CableMap
Detects Analog SmartTone Signal (500-1200Hz) and other analog toners. |
| Toner interface |
Main Mod8 port for cablemap on all four pairs of UTP / STP cabling |
| Auto power down |
Turns off automatically after one hour of inactivity |
| Country of Origin |
Malaysia |
|
|
|
|